06 Series BullyEdgers - featuring vacuum bonded industrial diamonds

Bully Edgers are Available in 3 Different Profiles

Detailed Product Information

The BullyEdger simply attaches directly to your variable speed grinder or polishers 5/8" inch arbor. This allows for a no slip direct attachment, and is easy to attach and remove.

The BullyEdger contains 2 sealed precision bearings, which attach to 2 rotating registration guides. The top registration guides ensures that your Y or vertical axis is perfectly registered. The bottom guide controls your X or horizontal registration, the distance from the edge of the media. This ensure prefect registration even on curved pieces

Available Profiles and Sizes

 1/4" Half Bullnose

Part Number: 06-BULLY114R

Use this Bully Edger to create a small accent bull nose on thinner stone pieces like on fireplace mantels, shower features such as soap boxes, when ever just a touch of bull nose is required. You can also use this size on accent pieces and trim stone to give it that final touch.

 3/8" Half Bullnose

Part Number: 06-BULLY38R

This Bully Edger is good for thicker stone. Use this radius for a more pronounced bull nose, yet one that offers a level of protection against jagged edges like on stone table tops, and shower and bath benches.

 1/2" Half Bullnose

Part Number: 06-BULLY12R

This Bully Edger is for larger bull noses on larger pieces of stone. Its general purpose is great for most use. Use on decorative trim pieces, and to just give a generous bull nose to every aspect of your project.

 3/4" Half Bullnose

Part Number: 06-BULLY34R

This Bully Edger is perfect for large thick stone, when you want everybody to know that the bull nose is present. You can also flip your stone over and do it again, for a double bull nose look, with a small or large flat edge. Perfect for use on shower trims, and offers a much higher level of safety against head injury.

 3/4" Ogee

Part Number: 06-BULLY34O

Ogee's give your work that classic ancient look from the Lonic or Corrinthian Order. It's perfect for molding and trim finishes. Use this Bully Edger for stone table tops, and decorative trim that protrudes from the main object. This size is perfect for smaller accent and trims pieces, when just a small ogee is desired.

 3/8" Ogee

Part Number: 06-BULLY38O

When a larger ogee is required for thicker stone pieces, or stone trim that protrudes much farther out, use this Bully Edger to put that ogee finish down. Keep in mind that because this ogee is wider and deeper, your stone should be thicker to retain strength against stone breakage. Perfect for use on stone table tops, bathroom counter tops, and decorative trim pieces.

 1 1/2" Full Bullnose

Part Number: 06-BULLY112FB

This Bully Edger is for use on very thick stone, like kitchen and bathroom counter tops. It provides a full 1 1/2" full bull nose, which is capable of providing a complete half circle on 1 1/2" inch thick stone. It can also be used for very thick trim pieces as well.

Companion Products